1 800 661 1801

Janome 7700 Auto Plate Converter

The Janome 7700 needle plate will be converted for straight stitch sewing without requiring a separate plate. When you select straight stitch D1S, D2S or D3S from the direct selection keys, the LCD screen will advise you before closing the plate converter. If the bobbin thread is pulled out through the needle plate hole, press the OK key under Set. Now follow the instructions that appear on the LCD screen to trim the thread and to close the plate converter.

Press the OK key under Ready to close the plate converter, if the threads have been already cut, by pressing the thread cutter button.