1 800 661 1801

Janome Buttonhole Foot Transparent

Putting on an extra large button

The Buttonhole foot Transparent lets you put on buttons that are too large for your sensor buttonhole foot. Begin by measuring the diameter and depth of your button. Using a water-soluble marker, mark the size of the buttonhole on your fabric; attach the Buttonhole foot Transparent. Select the automatic buttonhole function, which is available on several Janome machines. Place the bottom of your marked buttonhole at the needle position. Start sewing. When you reach the top mark, touch the reverse button. The machine will stitch the top bar tack, and return to the bottom. Once it reaches the bottom, touch the reverse button again, and it will sew the right hand side of the buttonhole. At the top of the buttonhole, touch the reverse button one last time so it will complete the stitch and knot off. On Janome machines equipped with the automatic buttonhole function, the size of the button hole has now been memorized, and the machine will now sew additional button holes at the same size.