Janome Juno S1234DX Serger

Janome Juno S1234DX is a perfect addition to your existing sewing machine, to enable faster completion of projects and a highly professional finish to your work. The S1234DX serger takes care of the tricky tasks like finishing seams or edges, complementing the work of any Janome sewing machine to perfection.

With a dedicated serger you can now quickly sew through various fabric surfaces and overcome the challenges of a regular sewing machine. In addition to its affordable price tag, the Juno S1234DX is loaded with features, and equally adept at being a workhorse machine – going through long hours of work with minimal maintenance. With color coded threading system reference, new sewing techniques, detailed illustrations of threading and recommended needles – this machine adds great value to your sewing room.

The user manual is very helpful in understanding not only the machine operations and accessories but also for some useful tips on how to optimize your S1234DX features. The instructions are simple, and easy to follow.
Some of the S1234DX manual features are: 

•   Threading diagram with quick needle and thread chart
•   Quick reference chart for picot edge, narrow hem, pin tuck and rolled hem stitches
•   Peak stitching speeds up to 1300 stitches per minute
•   Differential feed ratio of 0.5 to 2.25, with dial for adjusting the feeding
•   1-4mm of fabric feed, with dial for adjusting the feeding
•   Retractable upper knife
•   0.12’’ to 0.28’’ cutting width range, with dial for adjustable width
•   Adjustable thread tension for adapting to different fabric surfaces and tension releasing device
•   Variable foot pressure with options to increase pressure for thicker fabrics in pre-set steps
•   Electronic foot control
•   Aligned spool pin stand (4 spool)
•   Maintenance instructions
•   Carry handle 

Janome Juno S1234DX machine features: 

•   Three or four thread convertible overlocking stitches, Single or twin needle options
•   Spacious flat-bed for large working space
•   Lay-in threading
•   Color-coded threading path details
•   Measurement marks in inches and metrics 
•   Adjustable cutting width
•   Built-in rolled hem conversion
•   Automatic tension release device
•   One-hand thread cutter under the face-plate
•   Foot controller for speed adjustment using foot pressure
•   Differential feed

Janome Juno S1234DX Accessories:

•   1 General purpose foot
•   4 Removable spool holders
•   Two screwdrivers
•   Tweezers
•   Set of needles
•   Combination power supply and foot pedal